CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: ¥| 12¤ë 29 20:36:58 CST 2005 (root@localhost.localdomain) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0 rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) CPU type 0x29006: 264MHz Total memory: 67108864 KBytes Total memory used by CFE: 0x80800000 - 0x8089BA00 (637440) Initialized Data: 0x80831B70 - 0x80834250 (9952) BSS Area: 0x80834250 - 0x80835A00 (6064) Local Heap: 0x80835A00 - 0x80899A00 (409600) Stack Area: 0x80899A00 - 0x8089BA00 (8192) Text (code) segment: 0x80800000 - 0x80831B70 (203632) Boot area (physical): 0x0089C000 - 0x008DC000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-17-31-2A-90-0B, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Null Rescue Flag. Null Restore Flag. set pivot_wait = 0 Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ..... 2723840 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00029006 Primary instruction cache 16kb, linesize 16 bytes (2 ways) Primary data cache 16kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.0 20010422 (prerelease) with bcm4710a0 modifications) #202 Thu Apr 6 18:06:13 CST 2006 BCM47XX ChipID = 0x4704, RevisionID = 8, Options = 0x2 Setting GPIO 3 to output of 1. Setting GPIO 6 to output of 1. Determined physical RAM map: memory: 04000000 @ 00000000 (usable) On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM4704 rev 8 at 264 MHz Calibrating delay loop... 263.78 BogoMIPS Memory: 61896k/65536k available (2423k kernel code, 3640k reserved, 132k data, 84k init, 0k highmem) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver v1.1.22 [Flags: R/O] i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-algo-bit.o: i2c bit algorithm module i2c-proc.o version 2.6.1 (20010825) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A Generic MIPS RTC Driver v1.0 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AEC6265: IDE controller on PCI bus 01 dev 10 PCI: Enabling device 01:02.0 (0000 -> 0003) AEC6265: chipset revision 16 AEC6265: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AEC6265: ROM disabled at 0x00000000 ide2: BM-DMA at 0x0180-0x0187, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x0188-0x018f, BIOS settings: hdg:pio, hdh:pio IDE: While probing, found an IDE channel that is busy (hde). IDE: Probably, this means the drive hasn't spun up yet. IDE: We'll wait for it to spin up (but no more than 30 seconds). IDE: The IDE channel is not busy any more, so we can continue probing. hde: HDT722516DLAT80, ATA DISK drive ide2 at 0x100-0x107,0x10a on irq 2 blk: queue 802c58c8, I/O limit 4095Mb (mask 0xffffffff) hde: 321672960 sectors (164697 MB) w/7674KiB Cache, CHS=20023/255/63, UDMA(33) Partition check: /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p63<6>PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Amd/Fujitsu Extended Query Table v1.0 at 0x0040 Physically mapped flash: JEDEC Device ID is 0xC4. Assuming broken CFI table. Physically mapped flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 Flash device: 0x200000 at 0x1c000000 Physically mapped flash: cramfs filesystem found at block 1410 Creating 4 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "cfe" 0x00040000-0x001f0000 : "linux" 0x0016099c-0x001f0000 : "rootfs" 0x001f0000-0x00200000 : "nvram" sflash: found no supported devices usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Enabling device 01:03.2 (0000 -> 0002) ehci_hcd 01:03.2: PCI device 1106:3104 ehci_hcd 01:03.2: irq 2, pci mem c000f000 usb.c: new USB bus registered, assigned bus number 1 ECHI PCI device 31041106 found. ECHI reg 0x49 = 80242520 ECHI reg 0x49 changed to = 80242500 ECHI reg 0x4b = 80242509 ECHI reg 0x4b changed to = 80242529 PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32 ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 new device strings: Mfr=3, Product=2, SerialNumber=1<6>hub.c: USB hub found hub.c: 4 ports detected host/usb-uhci.c: $Revision: 1.275 $ time 18:06:21 Apr 6 2006 host/usb-uhci.c: High bandwidth mode enabled PCI: Enabling device 01:03.0 (0000 -> 0001) ECHI PCI device 30381106 found. UCHI reg 0x41 = 10 UCHI reg 0x41 changed to = 0 host/usb-uhci.c: USB UHCI at I/O 0x200, IRQ 2 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 new device strings: Mfr=0, Product=2, SerialNumber=1<6>hub.c: USB hub found hub.c: 2 ports detected PCI: Enabling device 01:03.1 (0000 -> 0001) ECHI PCI device 30381106 found. UCHI reg 0x41 = 10 UCHI reg 0x41 changed to = 0 host/usb-uhci.c: USB UHCI at I/O 0x220, IRQ 2 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 new device strings: Mfr=0, Product=2, SerialNumber=1<6>hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver host/usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6 host/usb-ohci.c: usb-00:03.0, PCI device 14e4:4715 usb.c: new USB bus registered, assigned bus number 4 new device strings: Mfr=0, Product=2, SerialNumber=1<6>hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver usblp printer.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Skipping autodetection of RAID arrays. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear All bugs added by David S. Miller VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 84k freed Algorithmics/MIPS FPU Emulator v1.5 pivot_rc starting... pivot_rc proceeding to boot from disk... pivot_rc complete -> calling /sbin/init... rmmod: et: No such file or directory ip_conntrack version 2.1 (512 buckets, 4096 max) - 344 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_time loading Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmserbus.o Using /lib/modules/2.4.20/kernel/drivers/i2c/bcm2wire.o Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmrtcds1337.o Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmlm63.o Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o Using /lib/modules/2.4.20/kernel/drivers/scsi/frodo/frodo.o insmod: init_module: frodo: Device or resource busy Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmgpio.o Using /lib/modules/2.4.20/security/sec.o Using /lib/modules/2.4.20/kernel/drivers/se/bcm_se.o Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ip_conntrack.o insmod: A module named ip_conntrack already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ip_tables.o insmod: A module named ip_tables already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/iptable_filter.o insmod: A module named iptable_filter already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/iptable_nat.o insmod: A module named iptable_nat already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ip_autofw.o insmod: A module named ip_autofw already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ipt_TCPMSS.o insmod: A module named ipt_TCPMSS already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ipt_LOG.o insmod: A module named ipt_LOG already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ipt_MASQUERADE.o insmod: A module named ipt_MASQUERADE already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ipt_state.o insmod: A module named ipt_state already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ipt_time.o insmod: A module named ipt_time already exists Using /lib/modules/2.4.20/kernel/net/ipv4/netfilter/ipt_mac.o insmod: A module named ipt_mac already exists Checking to see that USB initialization is done... Turning on swapping... handling MD device /dev/md/0 analyzing super-block disk 1: /dev/null, failed disk 2: /dev/null, failed disk 3: /dev/null, failed disk 4: /dev/null, failed disk 5: /dev/null, failed disk 6: /dev/null, failed disk 7: /dev/null, failed Setting up swapspace version 1, size = 511995904 bytes handling MD device /dev/md/1 analyzing super-block Mounting /dev/se/2 on /shares/MYVOLUME1. Hit enter to short-circuit regular system start-up...Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 0 to IF -:eth0:- Added VLAN with VID == 1 to IF -:eth0:- WARNING: VLAN 1 does not work with many switches, consider another number if you have problems. --libwwwapps.so.4.l No SATA controller found. Device open failed: No such file or directory Device open failed: No such file or directory Device open failed: No such file or directory vlan0: Operation not supported eth1: Numerical result out of range eth1: Operation not supported eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument vlan0: No such process eth1: No such process eth0: No such process killall: udhcpd: no process killed killall: udhcpd: no process killed info, udhcp server (v0.9.8) started subnet 1 ffffff killall: dnsmasq: no process killed Try `iptables-restore -h' or 'iptables-restore --help' for more information. Try `iptables-restore -h' or 'iptables-restore --help' for more information. RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory running rcasus 2 restartwlan --libwwwapps.so.4.l httpd changing to language directory `English'. httpd pid is 170. --libwwwapps.so.4.l httpd changing to language directory `English'. httpd changing to document root `share_browsing'. dnsmasq: bind failed: Address already in use info, udhcp server (v0.9.8) started subnet 1 ffffff killall: upnp: no process killed calling upnp_main sensord pid is 0. No interface specified. Quitting... info, udhcp client (v0.9.8) started running rcasus 1 (null)killall: infosvr: no process killed killall: watchdog: no process killed killall: ntp: no process killed killall: rcamdmain: no process killed killall: waveservermain: no process killed killall: usbcopymain: no process killed killall: rcamdmain: no process killed killall: rcamd: no process killed killall: sendmail: no process killed rmmod: pwc: No such file or directory rmmod: ov511_decomp: No such file or directory rmmod: ov518_decomp: No such file or directory rmmod: ov51x: No such file or directory rmmod: i2c-core: No such file or directory rmmod: videodev: No such file or directory rmmod: audio: No such file or directory rmmod: soundcore: No such file or directory killall: waveserver: no process killed rmmod: usb-ehci: No such file or directory rmmod: usb-ohci: No such file or directory rmmod: usbcore: No such file or directory insmod: usbcore.o: no module by that name found insmod: usb-ohci.o: no module by that name found insmod: uhci.o: no module by that name found insmod: ehci-hcd.o: no module by that name found insmod: audio.o: no module by that name found <6>Linux video capture interface: v1.00 GPIO input handling: /sbin/miscio_input_change GPIO input handling: 0 /sbin/miscio_input_change GPIO input handling: /sbin/miscio_input_change GPIO input handling: 0 /sbin/miscio_input_change GPIO input handling: /sbin/miscio_input_change GPIO input handling: 0 /sbin/miscio_input_change ln: /shares/MYVOLUME1/bin/bin: Operation not permitted Album DIR exist cp: /apps/web/Layout_English/functions: omitting directory cp: /apps/web/Layout_English/img: omitting directory cp: /apps/web/Layout_English/picts: omitting directory cp: /apps/web/Layout_Taiwan/functions: omitting directory cp: /apps/web/Layout_Taiwan/img: omitting directory cp: /apps/web/Layout_Taiwan/picts: omitting directory Music DIR exist Video DIR exist Photo DIR exist USBCopy DIR exist Download DIR exist do not change mode cp: /shares/usr/.giFT/FastTrack: omitting directory cp: /shares/usr/.giFT/Gnutella: omitting directory cp: /shares/usr/.giFT/OpenFT: omitting directory cp: /shares/usr/.giFT/completed: omitting directory cp: /shares/usr/.giFT/ui: omitting directory cp: /shares/usr/gift-nasoc/share/giFT/FastTrack: omitting directory cp: /shares/usr/gift-nasoc/share/giFT/Gnutella: omitting directory cp: /shares/usr/gift-nasoc/share/giFT/OpenFT: omitting directory cp: /shares/usr/gift-nasoc/share/giFT/ui: omitting directory killall: thttpd: no process killed killall: dms: no process killed killall: snarf: no process killed killall: ctorrent: no process killed killall: gdc: no process killed killall: giftd: no process killed killall: dmathined: no process killed killall: mt-daapd: no process killed killall: asus_gift: no process killed dmathined-700gE-0.11.e 0 PCI devices found: Class 0501: PCI device 14e4:0800 (rev 8). Class 0200: PCI device 14e4:4713 (rev 8). Class 0200: PCI device 14e4:4713 (rev 8). Class 0c03: PCI device 14e4:4715 (rev 8). Class 0604: PCI device 14e4:0804 (rev 8). Class 0b30: PCI device 14e4:0816 (rev 8). Class 0703: PCI device 14e4:4712 (rev 8). Class 1000: PCI device 14e4:4718 (rev 8). Class 0500: PCI device 14e4:080f (rev 8). Class 0600: PCI device 14e4:4704 (rev 0). Class 0280: PCI device 14e4:4318 (rev 2). Class 0180: PCI device 1191:0008 (rev 16). Class 0c03: PCI device 1106:3038 (rev 97). Class 0c03: PCI device 1106:3038 (rev 97). Class 0c03: PCI device 1106:3104 (rev 99). echo for PaN ::: &&&PaN Hit enter to continue...giftd v.700gE-0.8.c BusyBox v1.00-pre2 (2005.11.11-01:19+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. # # cat /proc/cpuinfo system type : Broadcom BCM947XX processor : 0 cpu model : BCM3302 V0.6 BogoMIPS : 263.78 wait instruction : no microsecond timers : yes tlb_entries : 32 extra interrupt vector : no hardware watchpoint : no VCED exceptions : not available VCEI exceptions : not available # cat /proc/meminfo total: used: free: shared: buffers: cached: Mem: 63467520 49930240 13537280 0 11923456 22671360 Swap: 511991808 0 511991808 MemTotal: 61980 kB MemFree: 13220 kB MemShared: 0 kB Buffers: 11644 kB Cached: 22140 kB SwapCached: 0 kB Active: 8968 kB Inactive: 30932 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 61980 kB LowFree: 13220 kB SwapTotal: 499992 kB SwapFree: 499992 kB # ls /proc 1 428 98 miscio 101 430 bus modules 13 435 cmdline mounts 134 436 cpuinfo mtd 139 440 devices mtd_bytes_written 166 447 dma net 168 451 driver partitions 170 452 execdomains pci 172 454 filesystems perfcnt 175 456 fs scsi 178 457 ide self 181 463 interrupts sestat 186 464 iomem slabinfo 188 467 ioports stat 190 5 irq swaps 2 6 kcore sys 221 7 kmsg sysvipc 223 73 ksyms tty 224 74 loadavg uptime 225 77 locks usb 234 78 mdstat version 3 8 meminfo 4 93 misc # cat /proc/version Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.0 20010422 (prerelease) with bcm4710a0 modifications) #202 Thu Apr 6 18:06:13 CST 2006 #